I got a chance to get the case mostly finished last friday, thanks to some of the guys at my work. They helped me cut some of the hard cuts with a mill. (some of the small inside cuts) There is one hole in the front cut out for the 2x16 LCD display. One hole cut out for the power to the router board and another for the Ethernet ports. Finally there is a hole cut for the USB cable to plug into the Arduino. I did not cut a hole for the 2.1” power jack. I plan to use some power from the router to power the Arduino. I drilled and countersunk 7 holes on the bottom to mount and hold the two boards to the bottom. I used some copper (brass?) spacers (from pc case) to hold the two boards off the deck.